http://forums.visokio.com/categories/ideas/p4/feed.rss Mon, 30 Oct 17 12:22:44 -0400 Ideas en-CA http://forums.visokio.com/discussion/2469/connectors-improvement-to-flashtalking-apis Mon, 10 Feb 2014 11:55:18 -0500 daniel 2469@/discussions When selecting for multiple campaigns, I am finding it generates a lot of extra rows of data and takes exponentially longer to download as the number of campaigns increase.

Ideally the filter will reduce some of the data being retrieved as I found it took over 2 hours to download 30 campaigns of data via the API when I only needed some 2k rows (of a specific spotlight) out of nearly 2 million rows of data.]]> http://forums.visokio.com/discussion/2455/idea-file-level-reset-buttons Sat, 25 Jan 2014 10:15:51 -0500 Mees 2455@/discussions
Thanks, A]]> http://forums.visokio.com/discussion/2433/idea-connecting-lines-on-maps-using-bezier-style-curvess Wed, 18 Dec 2013 06:38:07 -0500 daniel 2433@/discussions
Example of maps with 'bendy' curves:

http://balaspa.50webs.com/mappingiris/
http://www.heathrowairport.com/flight-information/route-map

Current Omniscope:

]]> http://forums.visokio.com/discussion/2429/idea-tag-view-exclude-wordss Mon, 16 Dec 2013 21:02:42 -0500 DBuzacott 2429@/discussions
I'm currently working with some data in the new and improved "Tag view" (which is very nice!). However, I'd like to be able to exclude selected words from this visualisation without removing the entire records.

Attached is a screenshot of an example tag view. This uses a twitter feed in DataManager to look at the tweets from the official Twitter account (@twitter). What we would like to do is be able to exclude some of these words like "http", "https" and the like as they are not relevant to what we're trying to analyse. I have tried selecting these words and moving them out, but this removes the entire line (tweet) rather than just the words selected.

Is it possible to add this functionality? Possibly by allowing users to edit the "common words" list that are ignored (in the menu Fields -> Options -> Ignore common words)?

Thanks,
Daniel]]> http://forums.visokio.com/discussion/2426/idea-table-view-grouped-headers-displays Fri, 13 Dec 2013 09:25:09 -0500 TomRiggs 2426@/discussions http://forums.visokio.com/discussion/2427/idea-automation-absolute-vs-relative-file-pathss Mon, 16 Dec 2013 04:22:34 -0500 DominicChan 2427@/discussions
Please advise]]> http://forums.visokio.com/discussion/2425/idea-omniscope-jobs-boards Thu, 12 Dec 2013 09:14:39 -0500 alec_webliquid 2425@/discussions
This is not an Omniscope idea, but instead one for the forums/Visokio website. I have been trying recently to recruit another experienced Omniscope user and am finding it remarkably hard to find the right person. It also occurs to me that while Omniscope is an awesome tool, it is not widespread, and so I imagine that there are some users who would like to move job but are having a similarly difficult time finding a position that will suit their talents. If you are one of these people by the way, send me a private message :)

Therefore, I would like to propose the creation of a jobs board. It can only be a good thing for the Omniscope community as a whole if its members are more able to find and take advantage of opportunities as they arise, and if people such as myself are able to find and recruit the staff they need.

Please let me know what you think.

Cheers, Alec]]> http://forums.visokio.com/discussion/2417/idea-connectors-dc-storm-api Wed, 04 Dec 2013 06:28:10 -0500 daniel 2417@/discussions
http://dc-storm.com/en-uk/storm-platform/storm-reporting/

http://api.dc-storm.com/dcsapiws/v1/service.asmx

*Added

http://api.dc-storm.com/broker/v26/engage/engageservice.asmx?wsdl]]> http://forums.visokio.com/discussion/2411/ideas-map-view-overlaysboundary-layers Tue, 26 Nov 2013 15:15:20 -0500 dave 2411@/discussions Need also to specify colors for filled polygons when colormode "color by (overlay dataset)" i selected.]]> http://forums.visokio.com/discussion/732/connectors-mediamind-expanding-api-scopes Sat, 30 Apr 2011 10:22:40 -0400 tjbate 732@/discussions
]]> http://forums.visokio.com/discussion/1106/activation-linux-version-of-servers Tue, 22 Nov 2011 04:29:50 -0500 steve 1106@/discussions

• installable (by extracting & following simple instructions)
• licensable (through activation, as per the Windows and Mac versions, but supporting command-line activation)
• supporting any common x86 or x64 Linux systems on which Java 6+ runs
• compatible with text-only Linux servers, for use in headless mode as Server edition
• compatible with graphical Linux servers, for use as a UI application as Viewer, Desktop or Server editions
• supporting use as a service under /etc/init.d

Please vote or comment to register interest.]]> http://forums.visokio.com/discussion/2380/idea-amend-commonly-used-functions-listss Wed, 16 Oct 2013 07:46:03 -0400 Alexander 2380@/discussions
Just wondering if two small adjustments could be implemented in Omniscope. In the function list, the "Unique value count" is (for me) on of the most used functions. But this function is not in the 'commonly used' functions list.

And could all blocks be collapsed on the left side? Now the sources and feeds are shown when opening.

Thanks. ]]> http://forums.visokio.com/discussion/2376/idea-managing-tabs-apply-all-tabs-by-sub-tab-groupingss Mon, 14 Oct 2013 11:09:34 -0400 windsymphonic 2376@/discussions
For instance I have 2 parent tabs (A & B):

And Parent A tab has 3 sub-tabs and B has 4 sub-tabs.

Is it possible for any changes made in B's sub-tab to be apply to all sub-tabs in B without affecting A?

Thank you, Firman]]> http://forums.visokio.com/discussion/2372/idea-sampling-random-sample-by-percentages Fri, 11 Oct 2013 07:54:07 -0400 earheart 2372@/discussions http://forums.visokio.com/discussion/2368/idea-field-counts-in-mergejoin-and-aggregation-blockss Mon, 07 Oct 2013 09:32:46 -0400 cgamolo 2368@/discussions
]]> http://forums.visokio.com/discussion/2363/idea-barline-view-axis-row-label-displays Fri, 04 Oct 2013 06:47:52 -0400 Alexander 2363@/discussions
In 2.8 the bar views comes automatically with a rowlabel that shows the measures used in the view.
This uses a lot of space in the view.



Can we disable this function. And would it be possible, if we need it that we can orientate it vertically?

Thanks]]> http://forums.visokio.com/discussion/2351/idea-scheduler-watchfolder-process-files-in-copied-orders Thu, 19 Sep 2013 05:06:00 -0400 alec_webliquid 2351@/discussions
Would it be possible to implement functionality to process scheduler XML files in the order that they are copied to the watch folder? I have my processes set up in a sequential, multi-file structure, similar to the way you advise for the .iok files themselves. I would love to be able to copy all my XML files to the watch folder at once and trust that they will be processed in the correct order. Currently, I have to do it in two lots as there is no guarantee it will happen this way.

I am aware I could write more XML files which deal with all of my .iok files at once, and I may do so in the short term, but this is still something I would very much like to see if possible.

Is this request feasible?

Cheers]]> http://forums.visokio.com/discussion/2256/idea-recalc-button-highlighted-red Sat, 20 Jul 2013 13:46:59 -0400 Alfonso 2256@/discussions
Due the number of formulae involved and the large amount of data managed, our model file needs to work in Manual Calculate mode,

We think there currently exist three Calculation Modes:

- 1) Automatic (with the Skip Option or Total option when start the mode, the Omniscope acts in automatic).
- 2) Recalculate all....
- 3) Recalculate only formula you have selected first....

...only the options 1 and 2 can avoid coherence problems of calculated data.

We prefer the first one, but only for select the Skip (saltar) option and then we need to deactivate the automatic calc. (for navigation and data entry problems), as it is a bit complex if you are making simulations, the user don't like so much the solution.

Could I suggest to create a new option. Manual option that use the Skip option only for one time and after the calcul process return to manual calcul mode?.

Also, we need a Warning that help the user to see in what Calcul mode is working, because the navigation and data entry times change dramatically between two mode settings.

Thanks for your attention.

Alfonso


]]> http://forums.visokio.com/discussion/2188/idea-pivot-view-2-non-uniform-rowcolumn-sizings Mon, 10 Jun 2013 12:28:55 -0400 milo 2188@/discussions http://forums.visokio.com/discussion/796/idea-pie-view-improved-labellings Tue, 31 May 2011 20:08:00 -0400 hgross 796@/discussions http://forums.visokio.com/discussion/737/idea-connector-marin-software-api-available-yets Tue, 03 May 2011 13:13:14 -0400 checkyourfuel 737@/discussions http://forums.visokio.com/discussion/2177/idea-pivot-view-restore-columnrow-differencess Fri, 31 May 2013 06:27:03 -0400 aknotts 2177@/discussions
Thanks, Andy]]> http://forums.visokio.com/discussion/2301/idea-formulae-custom-bucket-intervalss Thu, 29 Aug 2013 11:00:48 -0400 starsky51 2301@/discussions http://forums.visokio.com/discussion/2287/google-analytics-multi-channel-funnel-reporting-apis Wed, 14 Aug 2013 11:12:30 -0400 BDVS 2287@/discussions
I am trying to access data from the GA Multi-Channel Funnels Reporting API:
https://developers.google.com/analytics/devguides/reporting/mcf/v3/

Does anyone know how I could link up with this data and get it into Omniscope? I'm not experienced in linking up with APIs other than through the standard built-in feeds.

Thanks, Beth]]> http://forums.visokio.com/discussion/2279/idea-outputs-powerpoint-charts-sizings Mon, 12 Aug 2013 04:37:55 -0400 tjbate 2279@/discussions We can add another option allowing the slide to take arbitrary % of the screen either by width or height.
]]> http://forums.visokio.com/discussion/2274/idea-outputs-splitting-up-files-with-new-filter-output-blocks Wed, 07 Aug 2013 04:54:35 -0400 aknotts 2274@/discussions
I have a dataset which has a country field in it (about 50 countries). I basically filter my dataset (about 1m rows) per country and then create an IOK file for each country based upon a template. I use the batch block output in DataManager out had an idea for a new output block. It would basically combine a record filter and an output block. You would select one column to split the data by and it would create an one output file for as many items in that category that was split and create a file name based upon a mask (similar to the timestamp mask) and then append the split name to the end of the mask.

eg - Split by: [Source Country]
File mask: Country Detail File -
Template: Country Detail File Template.iok
Output Type: IOK/IOM

This would have less functionality than the batch output but would enable much quicker splitting of data files into multiple files.

If you think its a good idea, would be happy to discuss further

Andy]]> http://forums.visokio.com/discussion/2263/idea-canned-and-custom-script-librarys Fri, 26 Jul 2013 10:14:59 -0400 daniel 2263@/discussions
I just copy and pasted the comments taken from Chris in another thread since it's already well explained:
http://forums.visokio.com/discussion/1102/coordinate-conversion-latlong-to-british-national-grid-2.7

"A script library, which would work in a similar way to the R-statistics library. When you dragged on a custom script block you could enter a new script or select a pre-configured script from the library. This would mean we could have an Omniscope library, which would contain scripts that were general purpose and useful for all users, and a user library where individual Omniscope users could create their own scripts."

And further development for wider inclusions:

"Combining the "R-statistics", "Remote operation" and "Custom script" blocks into a single "Custom operation" block that would let you choose what type of operation you wanted to perform, select the parameters and configure the operation. So, for example, you could configure it to run an executable or upload data to a web service. You could then export operations from your library to other users. This would be a fairly substantial piece of work and hasn't been of high-enough priority up to now, but potentially it would be quite powerful"


Example scripts:
Conversion of OSGB36 grid references to latitude & longitude values
http://forums.visokio.com/discussion/1102/coordinate-conversion-latlong-to-british-national-grid-2.7

Pretty Date (neat looking if possible)
http://ejohn.org/projects/javascript-pretty-date/
]]> http://forums.visokio.com/discussion/2257/idea-filtering-exportimport-multiple-filter-settingss Sat, 20 Jul 2013 13:53:17 -0400 Alfonso 2257@/discussions
This would also be useful for saving/returning a file to the 'official' settings of all the filters on a tab or view or by groups.

Thanks for attention...Alfonso]]> http://forums.visokio.com/discussion/2253/idea-graph-view-mouse-hover-value-display-optionss Thu, 18 Jul 2013 11:52:45 -0400 mhalletthaybak 2253@/discussions
Instead of showing my £355k - which I can see on the y-axis myself - is it possible to set it as another field? i.e. I want to show the Directors our most profitable products and those which contribute most to the business and talk through which these are, without having to click and go into every single one.

Being able to quickly hover and see it is "product X" would help massively in this top line overview

Thanks in advance, Michael]]> http://forums.visokio.com/discussion/1811/idea-page-breaks-for-pdfpowerpoint-table-outputss Thu, 04 Oct 2012 07:06:50 -0400 benjamin 1811@/discussions
Is there any way to include page breaks in the table so that when I output the tab to PDF/PowerPoint the sections between each page break are printed? i.e. the table is output to PDF/PowerPoint as however many PDF/PowerPoint slides.. each slide being a different page break section in the table?

Thanks, Ben
]]>