http://forums.visokio.com/categories/general/p11/feed.rss Mon, 30 Oct 17 17:54:41 -0400 General en-CA http://forums.visokio.com/discussion/2047/performance-2.8-alpha-running-out-of-memorys Wed, 13 Mar 2013 06:04:10 -0400 Alexander 2047@/discussions
My first idea was that this had to do with maximum settings in "instal.properties" or "wrapper.config". After enabling and adjusting the maximum memory values in these 2 files, the performance of 2.8 did not increase.

Please advise us on what to do? Thanks in advance!

Regards, Alexander]]> http://forums.visokio.com/discussion/2037/scheduler-ordering-task-lists-version-2.8 Tue, 05 Mar 2013 17:25:25 -0500 cgamolo 2037@/discussions http://forums.visokio.com/discussion/2050/mapping-geocodings Fri, 15 Mar 2013 08:48:57 -0400 grahamb 2050@/discussions http://forums.visokio.com/discussion/2042/connectors-doubleclick-cross-site-corrected-reach-report Fri, 08 Mar 2013 04:49:49 -0500 JfJf 2042@/discussions
There is one report that is very useful which its not currently enabled in the API, the Cross Site Corrected Reach. Is this something that could be enabled?

Attached is a list of the DFA reports.

Cheers, ]]> http://forums.visokio.com/discussion/1626/integration-manual-input-of-data-via-omniscopes Wed, 27 Jun 2012 10:58:21 -0400 indranildatta 1626@/discussions
Cheers, Indranil]]> http://forums.visokio.com/discussion/2036/sources-capture-text-data-from-imagess Tue, 05 Mar 2013 04:11:37 -0500 nitiwan 2036@/discussions
Are there any functions on Omniscope that we can use to extract data (text) from scanned image files (pdf, jpg)?

Thank you.]]> http://forums.visokio.com/discussion/2033/sources-deriving-datarenaming-pdf-document-imagess Sat, 02 Mar 2013 10:40:38 -0500 sherriff 2033@/discussions
Any suggestions as to how to do this?]]> http://forums.visokio.com/discussion/2010/datamanager-validate-data-block-curious-behaviours Fri, 08 Feb 2013 09:09:03 -0500 cmollo 2010@/discussions #6 is greater than 1. The validation then fails, as expected. See the following screenshot (or attached "ss3" file).



Questions:
1. I click the Update button on the Validate Data block, but the update does not seem to be successful... the Update button remains red and the Co2_improvement field of record #6 shows the old value. Why is this?
2. Is there a way to determine what rule(s) is failing and on what record(s)?
3. Why does the preview show "unavailable" for all records after record #10 (see following screenshot)? It would make sense if the preview showed "unavailable" for all records after record #5 (since record #6 is the record with the invalid data).



Thanks!
Chris
]]> http://forums.visokio.com/discussion/1853/option-to-always-maintain-upperlower-case-2.8- Tue, 23 Oct 2012 06:56:47 -0400 alec_webliquid 1853@/discussions
Incidentally Visokio, this happens even when 'Preserve upper/lower case of field name' is selected in the Manage Fields menu. Cheers]]> http://forums.visokio.com/discussion/2024/connectors-ms-atlas-api-feed-restrictionss Tue, 19 Feb 2013 11:50:03 -0500 ALC 2024@/discussions
Also is it possible to select actions if you do not have the GUID's? I have the action name but this appears to give me an error if I paste this in?

Thanks, Anna
]]> http://forums.visokio.com/discussion/2023/source-block-or-connector-for-amazon-redshifts Tue, 19 Feb 2013 05:44:02 -0500 alec_webliquid 2023@/discussions http://forums.visokio.com/discussion/347/tag-view-word-cloud-stemmings Mon, 05 Jul 2010 10:22:18 -0400 sdhayes 347@/discussions For example becomes (1) and (2)
Is there any way to turn this off/retain the full text string?]]> http://forums.visokio.com/discussion/1868/formulae-using-variable-device-results-in-formulaes Fri, 26 Oct 2012 06:28:07 -0400 davedunckley 1868@/discussions
So that I could do somthing like this:

= [device 1 setting] divided by [device 2 setting]?

Dave
]]> http://forums.visokio.com/discussion/2013/datamanager-import-disable-field-name-correction-s Mon, 11 Feb 2013 06:56:51 -0500 CRead 2013@/discussions
e.g. field name 'BUN' gets altered to 'Bun']]> http://forums.visokio.com/discussion/2011/outputs-printing-multiple-filtered-versionss Mon, 11 Feb 2013 03:01:41 -0500 misakch 2011@/discussions
For example on the view there is a filter named "Category" with options A, B and C and in resulting .ppt I want to have three slides - one showing situation for Category A (thus Category A is checked), one for Category B and final one for Category C.,

Thanks - Michal]]> http://forums.visokio.com/discussion/1281/r-integration-installation-with-3rd-party-dependent-packagess Tue, 07 Feb 2012 10:32:33 -0500 chris 1281@/discussions
As you may or may not be aware, in Omniscope 2.7 we have introduced integration with the R statistics package.

Please use this forum post to ask any questions about the Omniscope/R integration and also to provide us with feedback. In particular we would be interested in:

- What problems you have encountered.
- Any suggestions for improving the interface or overall functionality.
- If you have any useful scripts that we could package with Omniscope and make available to all users.]]> http://forums.visokio.com/discussion/1996/formulae-dense-rank-functions Thu, 24 Jan 2013 17:19:38 -0500 bgrovens 1996@/discussions
Thanks for the help, Brian]]> http://forums.visokio.com/discussion/2000/table-view-scroll-bar-optionss Wed, 30 Jan 2013 21:28:36 -0500 shaji_o 2000@/discussions
I've tried squeezing the column size to make it all fit, but there are too many columns]]> http://forums.visokio.com/discussion/2002/connectors-doubleclick-dart-api-deprecation-alerts Thu, 31 Jan 2013 08:49:59 -0500 cgamolo 2002@/discussions
API deprecation alert! Older versions of the ReportCentralAPI will b deprecated on February 9th. All older versions of the API will no longer be supported. You must upgrade to version 13.4.8 or higher.

We just want to double check that this will not affect the current DART block in the latest Omniscope version as we are heavily relying on the DART connection to pull in campaign data.

Thanks.]]> http://forums.visokio.com/discussion/1999/append-two-datamanagers-in-the-same-iok-files Mon, 28 Jan 2013 14:41:13 -0500 AzulMorganti 1999@/discussions Thank you!]]> http://forums.visokio.com/discussion/1993/details-disable-pop-up-in-all-tabsviewss Tue, 22 Jan 2013 14:30:01 -0500 alfonsofabra 1993@/discussions
Thanks in advance,

Alfonso]]> http://forums.visokio.com/discussion/1985/connectors-doubleclickdfa-api-version-useds- Mon, 14 Jan 2013 06:27:25 -0500 eman 1985@/discussions
I was just wondering which API version is currently being used in the Omniscope DFA Connector?

Thanks]]> http://forums.visokio.com/discussion/1991/connectors-doubleclick-missing-placements-in-dfis Fri, 18 Jan 2013 09:41:50 -0500 ALC 1991@/discussions
The missing placements start '-' could this be the reason why they are not in the Omniscope DFA feed?

Thanks, Anna
]]> http://forums.visokio.com/discussion/1988/formulae-working-days-between-datess Wed, 16 Jan 2013 05:04:00 -0500 enrico68 1988@/discussions
I'd like to know how to use this function in a 'html extended' script in a Content View and how to call this function in the same script?

Thanks, Enrico]]> http://forums.visokio.com/discussion/1982/scheduler-running-from-a-3rd-party-applications Fri, 11 Jan 2013 08:41:35 -0500 kattasureshkumar 1982@/discussions
Actually our requirement is , when we have got new flat files, Our front end application will submit a request , this will trigger Omniscope Scheduler as we had provided the Omniscope Scheduler path. Once all the files are submitted, Omniscope Scheduler should stop and should close. Again if the front end application sends a request then Omniscope Scheduler should rerun and process the data and the Scheduler should stop after data is published.

Please let us know if we are doing it in a wrong way.

Thanks, Suresh.]]> http://forums.visokio.com/discussion/1905/transformation-date-range-splits Mon, 19 Nov 2012 11:25:55 -0500 dszl136154 1905@/discussions I was wondering if Omniscope could solve the following problem?

I have the following table:

Start Date End Date Spend
20-Sep-12 27-Sep-12 £4,200
28-Sep-12 01-Oct-12 £2,000


I would like to draw one bar for each day between start and end dates sized by an average spend per day. I reckon to do this, I would need to convert the data into the following format:

Date Spend
20-Sep-12 £600
21-Sep-12 £600
22-Sep-12 £600
23-Sep-12 £600
24-Sep-12 £600
25-Sep-12 £600
26-Sep-12 £600
27-Sep-12 £600
28-Sep-12 £500
29-Sep-12 £500
30-Sep-12 £500
01-Oct-12 £500

Is it possible to do it in Omniscope? If yes, could you help me with it, please?
Thanks]]> http://forums.visokio.com/discussion/1981/data-typing-text-vs-categoriess Thu, 10 Jan 2013 20:54:08 -0500 shaji_o 1981@/discussions
However there a some instances where "List of categories" doesn't appear as an option under filter type. Is this because there are too many values for a check box? ]]> http://forums.visokio.com/discussion/1975/outputs-uploading-exported-text-.txt-file-to-an-ftp-folders Wed, 09 Jan 2013 07:43:24 -0500 stuartjmccoll 1975@/discussions
I'm using a Desktop Edition and would rather not have to manually start up Filezilla each day!

The issue I am having is that no matter what I put as the address (when I click on "Enter URL") in my URL Output block I get an error saying "Unknown host". Could someone clarify what I need to fill in to get it to work?

Let me know if I need to be more specific (first Visokio forum post!)

Thanks, Stuart]]> http://forums.visokio.com/discussion/1699/map-view-overlays-importing-esri-shapefiless Sat, 11 Aug 2012 18:04:48 -0400 stein 1699@/discussions http://forums.visokio.com/discussion/1974/filtering-finding-whole-words-in-text-strings-using-only-record-filters Wed, 09 Jan 2013 06:14:46 -0500 aknotts 1974@/discussions
Using version 2.7 b452 (03-Dec-2012 14:47:32) r74529

Thanks, Andy
]]>